CONVERT
MTS → TS
Tap to choose your fileDRAG. DROP. DONE.
Upload any file and our engines will handle format detection automatically.
Max 25 MB · Free plan · No signup required
Convert to:
Detecting available formats...
Optimize for
Leave empty to use original name. Extension added automatically.
Uploading...
Processing your file...
Fast, secure MTS to TS conversion. No registration required.
Setup: MTS is the AVCHD camcorder variant of the MPEG transport stream. Goal: an interchangeable TS. If you need a TS version of a MTS clip for a social platform, a stock site or a CMS upload widget, this tool handles the job without re-rendering anything when it does not have to. The output is the same pixel data in a container the destination actually accepts. Worth knowing: MTS is the AVCHD camcorder variant of the MPEG transport stream. Meanwhile TS is the MPEG transport stream, used in broadcast and HLS streaming segments.
AVCHD Video
Source formatMTS (AVCHD) is a high-definition video format from Sony and Panasonic camcorders.
MPEG Transport Stream
Target formatTS (Transport Stream) is used for broadcasting, streaming, and recording live TV.
Why convert MTS to TS
Sending MTS to someone on a non-matching operating system frequently leads to "file cannot be opened". TS avoids that by sitting in the middle of everyone's compatibility list. The repackage runs quickly and without generational loss when codecs already align.
HOW TO CONVERT
MTS → TS
Drop the video file
Select a MTS file. We read the container and stream descriptors to plan the conversion.
FFmpeg handles the repackage
When codecs align, FFmpeg rewraps the existing streams into a TS container — no quality loss, near-instant finish.
Retrieve the TS
The TS download is ready in seconds for stream-copy jobs, minutes for full transcodes.
Common Use Cases
Share across platforms
Send TS files to anyone without worrying about whether they have the right software for MTS.
Embed in documents
Drop TS output into Word, Google Docs, PowerPoint, Notion or a website without conversion warnings.
Optimize size
TS often produces smaller files than MTS for web, email and storage.
Archive & future-proof
Store in a widely-supported format that will still open on future operating systems without legacy plugins.
MTS vs TS — Strengths and limitations
What each format does best, and where it falls short.
MTS Strengths
- Native format for every AVCHD camcorder since 2006.
- H.264 compression — small files for high-def quality.
- Direct compatibility with iMovie, Premiere, Resolve, Final Cut.
- Carries Dolby Digital 5.1 audio on flagship camcorders.
Limitations
- Slow to decode — editors typically transcode for editing.
- Proprietary folder-structure conventions complicate direct import.
- Largely legacy as smartphones replaced dedicated camcorders.
TS Strengths
- Designed for noisy channels — packet-level error correction.
- Multi-program: one TS can carry several TV channels.
- Native format for all digital TV broadcasts and HLS streaming.
- Streaming-first: no need to download whole file to start playing.
- 30+ years of stable, deployed infrastructure.
Limitations
- Packet overhead (~3% vs Program Stream).
- Seek index is implicit — requires scanning for random access.
- Multiple audio/subtitle selection requires parsing PMT (Program Map Tables).
MTS vs TS — Technical specifications
Side-by-side comparison of the technical details.
MTS
- MIME type
- video/mp2t
- Extension
- .mts
- Container
- BDAV MPEG-2 Transport Stream (192-byte packets)
- Video codecs
- H.264 (AVCHD Main/High Profile)
- Audio codecs
- AC-3 (Dolby Digital), LPCM
TS
- MIME type
- video/mp2t
- Extensions
- .ts, .m2ts, .mts
- Standard
- ISO/IEC 13818-1 (MPEG-2 Systems)
- Packet size
- 188 bytes (standard); 192 bytes (M2TS/Blu-ray)
- Primary use
- Broadcast TV + HLS streaming
| Specification | MTS | TS |
|---|---|---|
| MIME type | video/mp2t | video/mp2t |
| Extension | .mts | — |
| Container | BDAV MPEG-2 Transport Stream (192-byte packets) | — |
| Video codecs | H.264 (AVCHD Main/High Profile) | — |
| Audio codecs | AC-3 (Dolby Digital), LPCM | — |
| Extensions | — | .ts, .m2ts, .mts |
| Standard | — | ISO/IEC 13818-1 (MPEG-2 Systems) |
| Packet size | — | 188 bytes (standard); 192 bytes (M2TS/Blu-ray) |
| Primary use | — | Broadcast TV + HLS streaming |
MTS vs TS — Typical file sizes
Approximate file sizes for common scenarios.
MTS
- 1 min HD AVCHD (17 Mbps) ~130 MB
- 1 hour AVCHD Full HD ~8 GB
TS
- HLS video segment (6 seconds, 1080p) 2-5 MB
- 1 hour recorded TV (HD) 4-8 GB
- Satellite transponder capture (1 min) ~300 MB
Quality & Compatibility
Resolution, frame rate and colour space are preserved end-to-end. If the TS container does not support some MTS features (chapters, multiple subtitle tracks, DRM-protected streams), those are flattened or dropped with a warning. Hard-coded subtitles in the video frames always survive.
Tips for Best Results
- Embedded subtitle tracks convert between MTS and TS when both containers support the same subtitle codec; otherwise burn the subtitles into the video first.
- For portrait (9:16) clips, make sure the TS encoder preserves the correct display aspect ratio — some players default to 16:9 if SAR is ambiguous.
- Long recordings (over an hour) benefit from chapter metadata; TS may not preserve MTS chapters — check before relying on them.
Frequently Asked Questions
Only when it has to. If the codecs inside MTS (usually H.264 or H.265 for video, AAC for audio) are accepted by TS, we stream-copy — the bytes are repackaged into the new container with zero re-encoding and no quality loss. When the source uses a codec the target does not support, we transcode at a matching bitrate to keep the visual quality close to the original.
With stream copy, expect the job to finish in seconds to tens of seconds regardless of video length — the work is mostly rewriting the container. Transcoding is slower (roughly real-time: a ten-minute clip takes about ten minutes) because every frame must be decoded and re-encoded. The progress bar shows which mode applies.
Yes. Resolution, frame rate, colour space and bit depth are preserved by default; stream copy is literally bit-identical on these parameters. If you explicitly pick a lower bitrate or a different codec in Advanced, the output is rebuilt to those settings, but the default is always "match the source".
Related comparisons
See these formats side by side to understand which fits your use case best.
Related Guides
DXF and DWG CAD Formats: The Complete Technical Guide
Master DXF and DWG: AutoCAD format history, DXF group codes and sections, entity types (LINE/ARC/INSERT/HATCH), layers and linetypes, blocks and xrefs, ezdxf Python library, DWG version codes, conversion to PDF/SVG/PNG, and when to use DXF vs DWG.
Read guideCSV and TSV Format: The Complete Technical Guide
Master CSV and TSV: RFC 4180 grammar, proper parsing with csv libraries, encoding pitfalls (UTF-8 BOM), dialect differences, type inference surprises, large-file strategies with DuckDB and Parquet, and conversion to JSON/Excel/SQL.
Read guideEPS Format: Complete Guide to Encapsulated PostScript Vector Files
Complete guide to EPS (Encapsulated PostScript) format: file structure, DSC comments, CMYK support, fonts, and how EPS compares to PDF, SVG, and AI for print and design.
Read guideSecure & Private Conversion
Your files are encrypted during transfer, processed in isolated containers, and automatically deleted within 60 minutes. We never read, share, or store your data.